Ricoh C3030 Operating Instructions Manual page 211

❖ Program Memory Lock ID
Program a Memory Lock ID to be entered before printing documents when
the Memory Lock function is activated.
A Press [Facsimile Features].
B Press [Initial Settings].
C
Press [Program Memory Lock ID].
D Enter an ID using the number keys, and then press [OK].
A Memory Lock ID can be any four-digit number, except 0000.
If you make a mistake, press [Clear] or the {Clear/Stop} key before pressing
[OK], and then try again.
Press the {User Tools/Counter} key.
E
❖ Internet Fax Settings
You can select to display the internet Fax icon or not. When you want to send
an Internet Fax, set On to display the icon.
• On
• Off
❖ Select Dial / Push Phone
Use this function to select a line type when the machine is connected to a G3
analog line.
Dial and Push lines are available for selection.
If the optional extra G3 interface unit is installed, settings for the extra G3
lines appear.
This function is not available in some regions.
A
Press [Facsimile Features].
B Press [Initial Settings].
C Press [Select Dial / Push Phone].
D
Press [Push Button Phone] or [Dial Phone (10PPS)] to select the line, and then
press [OK].
Press the {User Tools/Counter} key.
E
Initial Settings
4
133