Network Administrator Settings; System Settings - Ricoh C3030 Operating Instructions Manual

Network Administrator Settings

The network administrator settings that can be specified are as follows:

System Settings

The following settings can be specified.
❖ Interface Settings
• Network
All the settings can be specified.
*1
• IEEE 1394
All the settings can be specified.
*2
• IEEE 802.11b
All the settings can be specified.
Note
❒ If DHCP is set to [On], the settings that are automatically obtained via
DHCP cannot be specified.
*1
The IEEE1394 interface board option must be installed.
*2
The IEEE802.11b interface unit option must be installed.
❖ File Transfer
• SMTP Server
Server Name
Port No.
• E-mail Communication Port
• E-mail Reception Interval
• Scanner Recall Interval Time
• Number of Scanner Recalls
• Auto Specify Sender Name
• Max. Reception E-mail size
• E-mail Storage in Server
❖ Administrator Tools
• Administrator Authentication Management
Network Management
• Program / Change Administrator
Network Administrator
You can specify the user name and change the full-control user's authority.
• Extended Security
Driver Encryption Key
Settings by SNMP V1 and V2
Restrict Use of Simple Encryption
Network Administrator Settings
8
183