Ricoh C3030 Operating Instructions Manual page 251

E
Select the box to program.
When programming a new box, press [*Not Programmed].
To change a box already programmed, press it, and then proceed to step
a password is programmed, enter the password, press [OK], and then proceed
H
to step .
F
Press [Information Box].
G
Enter a box name, and then press [OK].
H
Enter the SEP Code.
To change the SEP Code, press [Clear] or the {Clear/Stop} key, and then try
again. To change the box name, press [Box Name], and then repeat the proce-
G
dure from step
I
Press [Password].
If you do not want to program a password, proceed to step
.
Box Settings
H
. If
L
.
173
4