Registering A User Code - Ricoh C3030 Operating Instructions Manual

Registering Addresses and Users for Facsimile/Scanner Functions

Registering a User Code

This section describes how to register a user code.
A
Press [System Settings].
B
Press [Administrator Tools].
C
Press [Address Book Management].
D
Check that [Program/Change] is selected.
E
Press the name whose code is to be registered, or enter the registered
number using the number key.
7
You can search by the registered name, user code, fax number, folder name,
e-mail address, or IP-Fax destination.
F
Press [Auth. Info].
G
Enter the user code using the number keys, and then press {q} key.
If you make a mistake, press [Clear] or the {Clear/Stop} key.
H
Press [TNext] twice.
210