Integration Server Authentication
To use Integration Server Authentication, you need a server on which the Scan-
Router delivery software that supports authentication is installed.
For external authentication, the Integration Server Authentication collectively
authenticates users accessing the server over the network, providing a server-in-
dependent centralized user authentication system that is safe and convenient.
To use [Integration Svr. Auth.], the machine must have access to a server on which
ScanRouter System or Web SmartDeviceMonitor Professional IS/Standard and
Authentication Manager are installed.
For details about the software, contact your local dealer.
To use Integration Server Authentication, which depends on communication via
the secure sockets layer (SSL), the Printer / Scanner unit must be installed.
Using Web Image Monitor, you can specify whether or not to check the reliabil-
ity of the SSL server being connected to.
Important
❒ During Integration Server Authentication, the data registered in the server,
such as the user's e-mail address, is automatically registered in the machine.
If user information on the server is changed, information registered in the ma-
chine may be overwritten when authentication is performed.
Note
❒ The built-in default administrator name is "Admin" on the Server and "ad-
min" on the machine.
Specifying Integration Server Authentication
This can be specified by the machine administrator.
This section explains how to specify the machine settings.
For details, see the Authentication Manager manual.
A
Press the {User Tools/Counter} key.
B
Select [System Settings] using {U} or {T}, and then press the {OK} key.
User Authentication
63
2