Saving Color Copies - Ricoh C3030 Operating Instructions Manual

Appendix
❒ Depending on the ambient temperature and humidity, steam may come from
the exhaust vent behind the control panel during printing. This is water va-
pour from the paper, not a sign of malfunction.
❒ If condensation forms inside the machine as a result of temperature change,
the machine may not print properly. To minimize this problem, use the op-
tional anti-condensation heaters.
❒ The optional anti-condensation heaters keep the machine in optimal operat-
ing condition at all times by ensuring its interior is always warm. For this rea-
son, the heaters will not go off when you switch the machine's main power
off.you have to switch them off intentionally. and the machine's interior is
kept warm.
3
❒ Be sure to make a note of the registered machine settings in case they are lost
due to accident or malfunction.
Reference
p.28 "Turning Off the Power"
p.29 "Turning Off the Main Power"

Saving Color Copies

Followings are notes on saving color copies.
• There is no difference between color prints and color copies in terms of fad-
ing. However, for long-term storage, make sure to store them in a binder
away from direct sunlight.
• Toner may melt if a print and a half-dried print are put on top of each other.
• Toner may also melt when using solvent type adhesive agents for pasting
prints.
• When folding prints, toner in the folds will come off.
• Toner may melt if it is placed on mats made of chlorinated plastic in locations
of high temperature for long periods of time.
• Toner may melt if prints are placed in places of extremely high temperatures,
such as near heaters.
36