Ricoh C3030 Operating Instructions Manual page 133

❖ Slip Sheet Tray
Allows you to specify and display the paper tray that is inserting slip sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
• Tray to Program
• Off
• Bypass Tray
• Tray 1
• Tray 2
• Tray 3 (optional)
• Tray 4 (optional)
• Copying Method in Duplex
• 2 Sided Copy
• 1 Sided Copy
• Display Time
• At Mode Selected
• Full Time
Note
❒ The paper guide for the optional LCT is fixed for A4K, 8
per. Contact your service representative if you need to change the paper size.
❒ When paper of the same type and size is loaded in two different paper trays
and you want to specify tray for 2 Sided Copy. If one of the trays is specified
as the default in Paper Tray Priority, assign 2 Sided Copy to that tray.
❒ A
mark appears next to the paper tray if [Off] is selected in [Auto Paper Se-
lect].
❒ [Auto Paper Select] can only be selected for the copier function if [No Display]
and [Recycled Paper] are selected. If [No] is selected, Auto Paper Select is not
valid for the tray.
❒ Functions using the cover sheet tray setting are the front cover function and
front/back cover function.
❒ If you set "Display Time" to "At Mode Selected" in "Cover Sheet Tray" and
"Slip Sheet Tray", the trays selected for the cover sheets and slip sheets are in-
dicated only if you have enabled the use of cover sheets and slip sheets.
Reference
"Covers", Copy/ Document Server Reference
"Slip Sheets", Copy/ Document Server Reference
Tray Paper Settings
1
/ "×11"K size pa-
2
2
55