Parallel Interface - Ricoh C3030 Operating Instructions Manual

System Settings

Parallel Interface

This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.
[Parallel Interface] is displayed when this machine is installed with the IEEE 1284
interface board.
2
❖ Parallel Timing
Sets the timing for the control signal of the parallel interface.
• ACK outside
• ACK inside
• STB down
❖ Parallel Communication Speed
Sets the communication speed for the parallel interface.
• High Speed
• Standard
❖ Selection Signal Status
Sets the level for the select signal of the parallel interface.
• HIGH
• LOW
❖ Input Prime
Sets whether to validate or invalidate the input prime signal upon reception.
• Active
• Inactive
❖ Bidirectional Communication
Sets the printer's response mode to a status acquisition request when using a
parallel interface.
• On
• Off
When set to [Off], bidirectional communication function will be disabled, and
the printer driver will not be installed under Windows Auto Detect function.
❖ Signal Control
Specify how error during printing or sending facsimile from the computer is
to be dealt with.
• Job Acceptance Priority
• Printer Priority
62