Ricoh C3030 Operating Instructions Manual page 451

Problem Cause
When D is blink-
White lines ap-
pear. ing, toner is be-
ginning to run
out.
When printing If the printer
graphics, the out- driver is config-
put and the ured to use the
screen are differ- graphics com-
ent. mand, the graph-
ics command
from the ma-
chine is used to
print.
Garbled charac- The correct print-
ters are printed. er language
might have not
been selected.
Images are print- The feed orienta-
ed in the wrong tion you selected
orientation. and the feed ori-
entation selected
in the printer
driver's option
setup might not
be the same.
There is consid- "Off mode /
erable delay be- Sleep mode"
tween the print might be set.
start instruction
and actual print-
ing.
Solution
Add toner. See p.89 "Adding Toner".
If you want to print accurately, set the printer driver to
print without using the graphics command. See the
printer driver Help.
Set the correct printer language.
Set the machine's feed orientation and the printer driv-
er's feed orientation accordingly. See the printer driver
Help.
The machine requires time to warm up if it has been in
"Off mode/Sleep mode". Specify "Off mode/Sleep
mode" in [System Settings], [Auto Off Timer].
Other Printing Problems
4
57