6-2-4 OPE Assembly
1. Before you remove the OPE Assembly, you
should remove:
- Rear Cover (see page 6-26)
- Scanner Assembly (see page 6-27)
2. Remove two screws securing the Scanner
Assembly
.
3. Pull the OPE Assembly as shown below.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
4. Unplug the two connector from the OPE
Assembly.
5. Remove nine screws securing the OPE PBA
to the OPE Cover.
3/03
Disassembly and Reassembly
6-29