6-2-15 Main Frame Assembly
1. Before you remove the LSU, you should
remove:
- Rear Cover (see page 6-26).
- Cover Rear Assembly (see page 6-25).
- Scanner Assembly (see page 6-27).
- Side Cover Assembly (see page 6-36).
- Exit Assembly (see page 6-42).
- Cover Paper Exit Assembly (see page 6-
43).
- SMPS (see page 6-45).
- LSU (see page 6-46).
2. Remove one screw in the Channel Base
Frame from the lower section of the Cover
Dummy Lower, and then remove four screws
to dissemble the Dummy Scan Lower.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
3. Remove the Locker Deve.
4. Unplug all the connectors.
3/03
Disassembly and Reassembly
6-47