Adf Upper Assembly - Xerox WorkCentre Pro 412 Service Manual

6-2-5 ADF Upper Assembly

1. Before you remove the ADF Assembly, you
should remove:
- Rear cover (see page 6-26)
- Scanner Assembly (see page 6-27)
- OPE Assembly (see page 6-29)
2. Open the ADF Upper Assembly.
Caution
Do not damage the two harnesses shown in the
figure below
3. Remove the Ground Cable and unlatch the
Link Tray from the Cover Gear, as shown
below.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
4. Remove the ADF Upper Assembly, as shown
below.
3/03
Disassembly and Reassembly
6-31