Scanner Assembly - Xerox WorkCentre Pro 412 Service Manual

6-2-3 Scanner Assembly

1. Before you remove the Scanner Assembly,
you should remove:
- Cover Rear Assembly (see page 6-25)
- Rear Cover (see page 6-26)
2. Remove six screws and take out the Shield
Main Upper.
3. Remove three screws, as shown below.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
4. Open the Side Cover Assembly, then open
the Front Cover and remove 2 screws.
5. Unplug the connector from the Main Board.
3/03
Disassembly and Reassembly
6-27