Adf Assembly - Xerox WorkCentre Pro 412 Service Manual

6-1-3 ADF Assembly

1. Before you remove the ADF Assembly, you
should remove:
- Rear Cover (see page 6-2)
- Scanner Assembly (see page 6-3)
2. Remove the five screws from the Platen
Cover.
3. Open the Cover open and pull the Cover Side
L and Cover Side R and unlatch the Side
Cover L by pushing the part hooked the
Platen Cover using a sharp tool.
Side Cover L
Cover Open
Platen Cover
Ass'y
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
Platen Cover Ass'y
Side Cover R
4. Pull the ADF Assembly upward and remove
it.
Platen Cover Ass'y
5. Take out the Open Cover.
3/03
Disassembly and Reassembly
6-7