Xerox WorkCentre Pro 412 Service Manual page 181

• By using Control Centre Application (Parallel & USB).
- Activate Control Centre 5.0.
- Select Firmware Upgrade Window.
- Click Browse Icon to search the Upgrade Firmware.
- Click Upgrade Icon.
- The message "Upgrading Firmware" will be displayed.
- Wait until the machine is initialised, this will happen automatically after completion of the upgrade.
- Click the Refresh icon when the machine has been initialized.
- The machine is now updated with new firmware.
2. Upgrade the Remote Fax.
- Performed on the Local Machine in the Service Center.
- Go to the Tech Mode -Search for the Flash Upgrade in Maintenance Item, select REMOTE.
- Enter Remote Fax Number to be upgraded.
- Multiple remote FAXs can be upgraded sequentially if you enter the multiple FAX numbers.
- Select All Remote Fax Number if required.
- Confirm Input. - Machine will start dialing and send its own image codes to remote fax machine(s).
- It will take 10 to 15 minutes to send the image to each remote FAX machine.
- The Remote Fax machine will automatically program the received image on its flash memory.
- If ECM mode is off, or Received Memory is not empty, or machine is being used, the remote upgrade
will not be performed.
WorkCentre Pro 412, FaxCentre F12 &
WorkCentre M15/M15i
Maintenance & Troubleshooting
3/03 7-11