Installing The Fuselage Servos - Seagull Models Spitfire Mk IX Assembly Manual

Elevator Fiberglass control horn.
INSTALL RUDDER CONTROL HORN.
Repeat steps to install the rudder control horn
as same as steps done for ailerons.
Fiberglass control horn.
Rudder Fiberglass control horn.
www.seagullmodels.com
Epoxy
Epoxy.

INSTALLING THE FUSELAGE SERVOS.

Because the size of servos differ, you may
need to adjust the size of the precut opening
in the mount. The notch in the sides of the
mount allow the servo lead to pass through.
1) Install the rubber grommets and brass
collets onto the throttle servo. Test fit the servo
into the aileron servo mount.
2) Secure the servos with the screws pro-
vided with your radio system.
Rudder and Steering servo.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Loctite secure.
1 PCS.
Rudder and Steering servo arm.
Throttle servo.
Adjustable Servo
connector.
Servo arm.
Throttle servo arm.
5