Apply The Decals - Seagull Models Spitfire Mk IX Assembly Manual

SPITFIRE - 2030 mm
Epoxy
4) Position the canopy onto the fuselage. Trace
around the canopy and onto the fuselage using
a felt-tipped pen.
22
1) If all the decals are precut and ready to
stick. Please be certain the model is clean and
free from oily fingerprints and dust. Position
decal on the model where desired, using the
photos on the box and aid in their location.
2) If all the decals are not precut, please use
scissors or a sharp hobby knife to cut the
decals from the sheet. Please be certain the
model is clean and free from oily fingerprints
and dust. Position decal on the model where
desired, using the photos on the box and aid
in their location.
lead into the receiver. Plug the battery pack
lead into the switch also.
the protective foam rubber to protect them
from vibration.
80 mm
inside the fuselage and secure it to the bot-
tom of fuselage using a plastic tape.
onto the fuselage. Use a hobby knife to cut a
slot in the top of the fuselage for the antenna.
Instruction Manual.

APPLY THE DECALS.

INSTALLING THE BATTERY-RECEIVER.
1) Plug the five servo leads and the switch
2) Wrap the receiver and battery pack in
3) Route the antenna in the antenna tube
Receiver.
4) The last detail is to install the antenna
Battery.