Seagull Models Spitfire Mk IX Assembly Manual page 21

www.seagullmodels.com
1
Metal Clevis
Hex Nut
C/A glue
INSTALLATION PILOT AND CANOPY.
1) Locate items necessary to install pilot and
canopy.
2) A scale pilot is included with this ARF. The
Seagull Pilot included fitting well to the cockpit.
(or you can order others scale pilot figures
made by Seagull factory. They are available at
Seagull distributors.)
If you are going to install a pilot figure, please use
a sanding bar to sand the base of the figure so that
it is flat.
3) Position the pilot figure on the canopy floor as
show. Locate the oval shaped on the canopy floor
and remove the covering. Use epoxy to glue this
into the base of the pilot figure and glue the cockpit
panel in place with C/A glue, please see pictures
as shown.
Fuel Tubing
21