How To Install Arcs Charts - Furuno FMD-3200 Operator's Manual

3. HOW TO MANAGE CHARTS
3. Click the [Install Licenses] button.
4. Find the medium that contains the license then click the [Open] button.
5. Click the [OK] button to install the license.
4937
3249
4937
1473
2376
4173
6. Click the [Close] button to finish.
7. Reset the power.
3.3.2

How to install ARCS charts

When you install charts from a medium, the system first loads a catalog, which stores
certain information into your SSD such as cell IDs, their position, and edition number,
from the install medium. Then, the system asks which charts you want to install from
the chosen medium. After building the catalog, you can view the contents of it by click-
ing the [Cell Status] button.
Note: Do not cancel the installation (with the [Cancel] button) of a chart while it is in
progress. Cancellation will automatically reset the power, stopping the installation. If
this occurs, try to install the chart again. If the installation fails, reset the power and try
again.
1. Set the medium that contains the ARCS charts.
2. Get into the Chart maintenance mode then click the [AUTO Load] button on the
InstantAccess bar. A prompt informs you that it may take a while to do the instal-
lation and are you sure to continue. Click the [OK] button. A message informs you
3-6
31 Mar 2015 N
31 Mar 2015 N
31 Mar 2015 N
31 Mar 2015 N
31 Mar 2015 N
31 Mar 2015 N
ARCS License
Delete Licenses
Export List