How To Use The Check Results Page - Furuno FMD-3200 Operator's Manual

Radio buttons, input boxes
Item
Context sensitive menus
A context-sensitive menu for setting the
draught is available on the [Alert Parame-
ters] page. Right-click [Draught] to show the
menu. [Set "ALL" setting to all legs] applies
the draught value of [Check type: All Legs] to all legs. [Clear setting] restores default
settings for each leg.
9.4.5

How to use the Check Results page

The [Check Results] page allows you to make safe water calculation for your route.
Click the [Check Route] button to do the check. After the button is operated, the alert
type and latitude and longitude position of the alert appear for applicable legs on the
route.
Note 1: In order to display charts with correct updated situation, always use current
date during your voyage. If your voyage lasts more than one week, set current date at
least once per week during your voyage.
Note 2: A route check can take longer with C-Map or CM-ENC charts. Wait until the
completion of the check.
Description
Route Bank
Alert items
Item
Seaplane Land- Seaplane landing area
ing Area
Submarine Tran- Submarine transit lane
sit Lane
Anchorage Area Anchorage area
MarineFarm Marine farm aquaculture
Aquaculture
PSSA Area Particularly Sensitive Sea Area
Non-official ENC No official ENC data
No Vector Chart No vector chart for area.
Not Up-to-date Chart not up to date.
Permit Expired Permit for chart has expired.
UKC Limit Under keel clearance limit
Set "ALL" setting to all legs
9. ROUTES
Description
Clear setting
9-9