Route Information Box - Furuno FMD-3200 Operator's Manual

2.1.6

Route information box

Asterisks appear in data locations when no route
is selected for navigation.
• Route: Name of monitored route
• Plan Speed: Planned speed to approach "To
WPT".
• Plan Course: Planned course between previ-
ous WPT and "To WPT".
• Course to Steer: Calculated set course to fol-
low the monitored route, including off track, drift
and gyro error compensations.
• CH Limit: Planned width of channel to approach
"To WPT".
• Off Track: Perpendicular distance the ship is
from the intended track. The off track figure can
be shown in meters or nautical miles. Click this
box, then select [Off Track] and unit desired, or
open the menu and select desired unit with [unit
of "Off Track"] in the [Route Information] menu.
• TC: Track Control System status. No indication
if TCS is disengaged from the ECDIS.
• To WPT: The waypoint that the ship is ap-
proaching.
• DIST to WOP (Wheel Over Point): Distance to
the point where rudder order for course change
at "To WPT" is given.
• Time to Go: Time to go to WOP (hh:mm:ss).
• Turn RAD: Planned turning radius at "To WPT".
• Turn Rate: Calculated rate of turn that is based
on current speed and planned turning radius.
• Next WPT: The WPT following the "To WPT".
• Next Course: Next course (in degrees).
Course to steer
Course to steer: 110°
Planned course: 90°
No current
WOL
Course to
steer: 120°
2. OPERATIONAL OVERVIEW
TC:
Planned course: 90°
Current
Current present
Minimize button
MANUAL
0.50 NM
0.50 NM
WOL
2-11