How To Manage Charts; How To Install Public Keys For Enc Charts - Furuno FMD-3200 Operator's Manual

3.

HOW TO MANAGE CHARTS

This chapter mainly shows you how to install the public keys, licenses and charts,
manually update chart objects, and synchronize charts. All chart-related operations
begin from the Chart maintenance mode, which you access by clicking the [CHARTS]
button on the Status bar.
Note 1: Charts, routes and user charts are shared with other FMD-3xx0, FCR-2xx9
and FAR-3x00 units, via LAN. Data is shared automatically; no operation is required.
Note 2: Chart processing (installation, deletion, etc.) may take several minutes de-
pending on the number of charts to be processed.
Note 3: If, when attempting to install charts, nothing appears on the display at the start
of the procedure, reset the power and try again.
Note 4: If installation of AVCS charts stops, the message "Chart installation has
stopped. Run the installation again. Installation will continue from the chart not yet in-
stalled." appears. This does not indicate completion of the installation. Restart the in-
stallation. The installation resumes from the chart not yet installed.
This message may also appear when installing CM-ENC, C-MAP Professional and
C-MAP Professional+ charts if the user does not confirm completion of the installation
within approx. one hour. (Installation window remains on the screen.) However, this is
not an indication of failed installation.
Note 5: When installing the AVCS LargeMedia, the message "No connection to don-
gle" may appear in the [Error/Warning Guidance] window at the completion of the in-
stallation. If this occurs, reinstall the media.
3.1

How to Install Public Keys for ENC Charts

Public keys authenticate the source and integrity of the ENC chart materials used in
this chart system. Before you install a new ENC chart, confirm that the corresponding
public key is installed.
1. Set the medium (DVD, USB flash memory, etc.) that contains the public key. (The
IHO public key is preinstalled.)
2. Get into the Chart maintenance mode then click the [Public Key] button on the
InstantAccess bar.
3. Click the [Load New Key] button to show the [Open File] dialog box.
4. Find the .pub file then click the [Open] button. The [Public Key] dialog box reap-
pears.
3-1