How To Select The Presentation Mode; Cursor Position Box - Furuno FMD-3200 Operator's Manual

2. OPERATIONAL OVERVIEW
2.5

How to Select the Presentation Mode

The presentation mode is available in North-up TM, North-up RM, Course-up TM,
Course-up RM, Route-up RM and Head-up RM. To select a presentation mode, click
the presentation mode indication to cycle through the presentation mode choices, or
click the triangle to show the drop-down list of presentation modes.
2.6

Cursor Position Box

The Cursor position box shows
• Cursor position in latitude and longitude
• Time to go to the cursor position
• The bearing (True or Relative) and range to the cursor position, or x-y coordinates
of cursor position. Click the bearing and range or x-y coordinates indication to
switch the display, in the sequence shown below.
2-18
Presentation mode
Click to show drop-down list of
presentation mode choices
Cursor position, Time to go
to cursor position
Bearing(T) and range to cursor position
Bearing(R) and range to cursor position
x-y coordinates of cursor position