Furuno FMD-3200 Operator's Manual page 404

APPENDIX 3 DIGITAL INTERFACE
ROR - Rudder order status
$**ROR, x.x, A, x.x, A, a*hh<CR><LF>
1 2 3 4 5
1. Starboard (or single) rudder order (-90 to 90.0)
2. Status (A=Valid V=Invalid)
3. Port rudder order (-90.0 to 90.0)
4. Status (A=Valid V=Invalid)
5. Command source location (B=Bridge P=Port wing S=Starboard wing
C=Engine control room E=Engine side/local W=Wing)
ROT - Rate of turn
$**ROT,x.x,A*hh<CR><LF>
1 2
1. Rate of turn, deg/min, "-"=bow turns to port (-9999.9 - 9999.9)
2. Status (A=data valid, V=data invalid)
RPM - Revolutions
$**RPM, a, x, x.x, x.x, A*hh<CR><LF>
1 2 3 4
1. Source (S=shaft E=engine)
2. Engine or shaft number (00 to 99)
3. Speed, revolutions/min (-9999.99 to 9999.99)
4. Propeller pitch (-100.0 to 100.0)
5. Status (A=data invalid V=data valid)
AP-26
5