Catalog Of Nm Cells; How To Find Nm Chart Object Information - Furuno FMD-3200 Operator's Manual

7. C-MAP CHARTS
7.9.3

Catalog of NM cells

A catalog of NM cells is maintained in the [Manage Charts] dialog box. To show this
box, get into the Chart maintenance mode then click the [Manage Charts] button on
the InstantAccess bar.
7.9.4

How to find NM chart object information

Do the following to find chart object information contained in the NM.
1. Right click a red hatched area in the chart area, then select [Object INFO] to show
the [Select Object] dialog box.
2. Click [Preliminary Notice] in the dialog box to show the [Chart object] dialog box.
The [Chart object] dialog box shows the following information:
• Cell (name)
• Drawing type (Preliminary Notice, Temporary Notice)
• Category (Area, etc.)
• The preview box provides a scaled-down image of the area selected. Click the im-
age to enlarge it.
• The [Attribute] window shows the attributes for the NM area selected. To find infor-
mation about an attribute, click it to show its information in the [Description] box.
Information: Description of area (for example, danger area).
Object name: Object name (number)
Pictorial representation: Associated diagram when applicable.
ENC affected: ENC affected by the NM
Textual description: Full text of the NM appears below [ENC Affected].
To print the chart object information, click the [Print Text] button.
7-6