How To Select The Presentation Mode - Furuno FMD-3100 Operator's Manual

2.4

How to Select the Presentation Mode

There are seven presentation modes available. However, depending on whether voy-
age navigation mode or voyage planning mode is active, some presentations modes
are not available.
1
* : Available only when a route is being monitored.
2
* : "TM" not shown in the presentation mode indication.
There are two methods to select a presentation mode:
• Click the presentation mode indication to cycle through the presentation modes.
• Click the
the mode you want to use.
Description of presentation modes
North-up
Course-up
Route-up
Head-up
TM
RM
Presentation
navigation
Mode
North-up TM Available
North-up RM Available
Course-up TM Available
Course-up RM Available
Not available
1
Route-up TM*
Available
1
Route-up RM*
Head-up RM Available
indication to show a drop-down list of presentation modes, then click
Presentation mode indication
: North (0°) is the top-center of the screen.
: Course is the top-center of the screen (at the time of selection).
: The planned course for a route being monitored is the top-center of the
screen. If route monitoring is disabled, Route-up mode automatically
changes to Course-up mode.
: Current heading is the top-center of the screen.
: True Motion. Own ship mark moves in relation to actual vessel move-
ment, chart is displayed in a fixed orientation.
: Relative Motion. Own ship mark is fixed at center of screen, chart
moves in relation to vessel movement.
Voyage Voyage
planning
mode mode
Available*
Not available
Available*
Not available
Available*
Not available
Not available
Click to show drop-down list of
presentation mode choices
2. OPERATIONAL OVERVIEW
2
2
2
2-19