Fan Assembly, Card Cage - Printronix P5000 Maintenance Manual

Fan Assembly, Card Cage

Removal
1. Prepare the printer for maintenance (page 132).
2. Cabinet Models: Remove the paper path (page 199).
Pedestal Models: Remove the top cover assembly (page 179).
3. Disconnect the card cage fan cable connector. (See page 244.)
4. Cabinet Models: Remove the two fan mounting screws from the bottom of
the fan. (See page 244, item 2.)
Pedestal Models: Remove the four fan mounting screws and nut. (See
page 234, items 1 through 4.)
5. Remove the card cage fan assembly from the card cage.
Installation
CAUTION
Air flow is INTO the card cage. Install the card cage fan so the label
faces toward the inside of the printer and the cable faces the front of the
printer.
1. Reverse steps 2 through 5 of the removal procedure.
2. Return the printer to normal operation (page 133).

Fan Assembly, Card Cage

183