Printronix P5000 Maintenance Manual page 82

Chapter 3
Troubleshooting Display Messages
Message
STACK OVERFLOW*
STACK UNDERFLOW*
82
Table 2. Message List
Explanation
Firmware error on the
controller board.
Firmware error on the
controller board.
Solution
1. Cycle power. Run the print job
again. If the message appears,
download the emulation software
again.
2. Cycle power. Run the print job
again. If the message appears,
replace the controller board.
Record the message and return it
with defective board.
1. Cycle power. Run the print job
again. If the message appears,
download the emulation software
again.
2. Cycle power. Run the print job
again. If the message appears,
replace the controller board.
Record the message and return it
with defective board.