Printronix P5000 Maintenance Manual page 84

Chapter 3
Troubleshooting Display Messages
Message
STACKER FULL
84
Table 2. Message List
Explanation
Status message: the power
paper stacker is full.
Solution
1. Unload the stacker.
2. Check the stacker limit switches.
(See page 99.) If the limit
switches are OK, go to the next
step.
3. Power off the printer. Remove the
paper path. Disconnect stacker
cables from the controller board,
stacker assembly, and the
stacker control panel (see Figure
69, page 344). Check cables for
cuts, breaks, or damaged pins.
Check continuity of cables. (See
Appendix A.) Replace any cable
that is damaged or fails continuity
test.