Printronix P5000 Maintenance Manual page 358

Appendix E
Installing The Power Stacker
38. Pull out the paper tray and install the paper tent. (Figure 85.)
Paper Tray
39. Install the paper path that you removed in step 4.
40. Install paper and test stacker operation. (Refer to the User's Manual.)
NOTE: The SureStak Power Stacker will stack forms from five to 12 inches
358
Note the positions of
alignment tab and the
paper fence.
A
Figure 85. Paper Tent
(12.7 to 30.5 cm) long. Using longer or shorter paper can cause error
messages and unpredictable behavior of the stacker. The stacker can
handle forms from 3 to 16 inches (7.6 to 40.6 cm) wide with no paper
tent in the paper tray, and from 3 to 15.5 inches (7.6 to 39.4 cm) wide
with the paper tent installed in the paper tray.
A
Paper Tent