Buell 2002 P3 Service Manual page 189

HOME
7. Lubricate cylinder wall, piston, pin and rod bushing with
engine oil.
8. See Figure 3-82. Compress the piston rings using PIS-
TON RING COMPRESSOR (Part No. HD-96333-51C).
9. Remove protective sleeves from cylinder studs. Install a
new cylinder base gasket. Make sure the piston does not
bump the studs or crankcase.
10. Install cylinder over piston.
11. Remove PISTON RING COMPRESSOR.
12. Assemble cylinder head. See
13. Install cylinder head. See
14. Install assembled engine. See
TION.
3-42 2002 Buell P3: Engine
3.5 CYLINDER HEAD.
3.5 CYLINDER HEAD.
3.4 ENGINE INSTALLA-
7658
1
1. Piston Support Plate (Part No. HD-42322)
Figure 3-81. Piston Support Plate
7657
1. Piston Ring Compressor (Part No. HD-96333-
51C)
Figure 3-82. Compressing Piston Rings
1