Buell 2002 P3 Service Manual page 122

HOME
17. See Figure 2-83. Remove the tape from the slide pipe
end.
NOTE
The recommended fork oil is hydraulic fork oil type "E".
18. Pour 9.2 oz. fork oil into fork.
19. Install lower spring seat and spring collar.
20. Coat a new O-ring with fork oil or sealing grease.
21. Install new O-ring onto spring seat.
22. See Figure 2-84. Push down on spring seat past groove
to install stopper ring. Stopper ring will lock into groove
when installed correctly.
3788
Figure 2-82. Install New Dust Seal
3781
Figure 2-83. Remove Slider Tube Protection
3769
Figure 2-84. Compressing Spring Seat
2002 Buell P3: Chassis 2-47