Buell 2002 P3 Service Manual page 119

HOME
5. See Figure 2-73. Clamp the slider assembly in a vise
with front fork holding tool (part no. B-4177).
6. See Figure 2-74. Install slider tube into slider assembly.
CAUTION
The outer tube can move freely up and down on the slide
pipe. Always hold both the slide pipe and outer tube to
prevent damage to bushings and seals.
7. See Figure 2-75. Install spring onto damper assembly.
2-44 2002 Buell P3: Chassis
3792
Figure 2-73. Clamping the Slider Assembly
3790
Figure 2-74. Slider Tube
3796
Figure 2-75. Install Rebound Spring