Specifications - Buell 2002 P3 Service Manual

HOME

SPECIFICATIONS

NOTE
Service wear limits are given as a guideline for measuring
components that are not new. For measurement specifica-
tions not given under SERVICE WEAR LIMITS, see NEW
COMPONENTS.
Engine sprocket – number of teeth
Clutch sprocket – number of teeth
Ratio*
Transmission sprocket – number of teeth
Rear wheel sprocket – number of teeth
Secondary drive belt – number of teeth
Ratio
Primary drive / transmission lubricant capacity
Overall gear ratios**
First gear (low)
Second gear
Third gear
Fourth gear
Fifth gear (high)
* Internal gear ratios indicate number of mainshaft revolutions required to drive output sprocket one revolution.
** Overall gear ratios indicate number of engine revolutions required to drive rear wheel one revolution.
CLUTCH PLATE THICKNESS
Friction plate (fiber) (in.)
Friction plate (fiber) (mm)
Steel plate (in.)
Steel plate (mm)
Clutch pack (in.)
Clutch pack (mm)
MAXIMUM ALLOWABLE WARPAGE
Friction plate (fiber) (in.)
Friction plate (fiber) (mm)
Steel plate (in.)
Steel plate (mm)
ITEM
Primary Drive (Engine-to-Transmission)
Final Drive (Transmission-to-Rear Wheel)
Transmission
WET ClUTCH Multiple disc
NEW COMPONENTS Service Wear Limits
35
56
1.60:1
27
80 Replace at 15,000 mi
139 Replace at 15,000 mi
2.96:1
32 fl. oz. (946 ml)
12.74
8.77
6.79
5.60
4.74
0.0866 + 0.0031
2.200 + 0.079
0.0629 + 0.0020
1.598 + 0.051
N/A .413 in. (minimum)
N/A
N/A
N/A
N/A
N/A
2002 Buell P3: Drive/Transmission
6.1
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
(16.787)
0.0059
0.150
0.0059
0.150
6-1