Network Problems - Net2Phone Max 410 User Manual

Max 410/420/430 User's Guide – Appendix
SYMPTOM
Unit shuts off
after operating
for some time
Console
screen display
freezes

Network Problems

When I attempt to connect to my Max 410/420/430
through a serial cable connection, I do not see any
text, or the text that appears is distorted.
Make sure the connection settings are as
follows:
Baud rate
Parity
Character size
Stop Bit
Flow Control
Make sure the serial cable is connected and
fastened to both the Max 410/420/430 and
your computer.
My network supports DHCP, but my Max 410/420/430
cannot obtain correct network settings.
Make sure DHCP is enabled.
POSSIBLE CORRECTIVE
CAUSE ACTION
Overheating Check ventilation
Faulty N2P Contact Technical
Max Service Center or
410/420/430 your reseller
Console fault Reset/replace
console
Software error Repeat power-up
procedure
Faulty N2P Contact Technical
Max Service Center or
410/420/430 your reseller
19200
None
8
1
None
74