The Login Button; Announce Account Balance; Routing Table Configuration - Net2Phone Max 410 User Manual

Max 410/420/430 User's Guide – Chapter 5

The Login Button

The Yes radio buttons in the Login column (shown in
Figure 18 above) are used to enable a port to receive
incoming Max-to-Max calls.

Announce Account Balance

The Max 410/420/430 lets the user designate how it will
announce the balance to the user, either by minutes
remaining, or balance in dollars remaining on the account.
You can also shut this function off if you don't want an
announcement after a call has been placed.
This function also lets you designate the port on which the
message will be heard, allowing the user to customize
each port by the caller.

Routing Table Configuration

Click the Routing Table Config link to access the Current
Routing Table page, illustrated below.
Figure 19 – Current Routing Table Page
The Routing Table is used to set up routing between two
or more telephone extensions connected to a single Max's
FXS ports. An entry must be added to the Current Routing
Table for each extension that must be able to receive calls
44