Class Of Service Configuration - Net2Phone Max 410 User Manual

Max 410/420/430 User's Guide – Chapter 5
1. Click in the Allow List box for the port that you
would like to configure.
2. Enter the number(s) that you would like to allow
for that port. Separate numbers with a comma
(,).
3. Select the radio button that represents how you
would like unauthorized callers to be handled.
Click one of the following radio buttons: Allow All
Callers, Disconnect Unauthorized Caller, or
Request Account and PIN From Unauthorized
Callers.
4. Click the Save button to save the setting.
A page displays the message, "Command
executed successfully."

Class of Service Configuration

This function is to set the call authorization classes for
restricting outbound calls. There are 6 classes: A, B, C, D,
E, and U. Class A has the most outbound call access
capability. Class B has the second most outbound call
access capability, and so on. Applying the restricted first
digit string to a class means that the restriction is applied
to all lower classes and not to higher classes. Class U
has the same meaning as OFF – there is no outbound call
control.
To add restricted digits to a class definition:
1. In the ADD Command table, click the Class
drop-down menu to select the class to which you
would like to define restricted digits.
2. In the Restricted First Digit box, type up to eight
(8) digits of the number you would like to restrict.
For example, if you want to create a class
that does not allow outbound calls to any
numbers beginning with 1-973, you would
enter 1973.
You can also enter 973 to restrict callers
who do not enter the 1 prefix.
58