Other Web Manager Functions; Load Default Config - Net2Phone Max 410 User Manual

Max 410/420/430 User's Guide – Chapter 5
Change Password
Current System Version
The system manager has the options of changing the
system name and the current password.
To change entries on this page, just enter the new
information into the desired fields, click the Save button,
and restart the Max.
If changes are made on this page, the system must be
restarted as discussed in Restart System on page 62
before the changes take effect.

Other Web Manager Functions

Load Default Config

Click the Load Default Config link to access the Click to
load factory settings page, illustrated below.
Figure 29 – Load Default Configuration Page
Current System Name -- the current
name assigned to the Max
Changing System Name – allows you to
enter a new system name
Current Login – the user name currently
logged into the Max Web Manager
Current Password – the current
password assigned to the user name
New Password – allows you to enter a
new password to be associated with the
current login
Confirm New Password – confirms the
password entered in the New Password
field
Hardware Version – the version of the
Max device
Software Version – the firmware version
64