Voice Configuration Table; Ip Configuration Table - Net2Phone Max 410 User Manual
Net2phone max 410/420/430 internet protocol device user's guide
Hide thumbs
Also See for Max 410:
- User manual (53 pages) ,
- Quick start manual (23 pages) ,
- User manual (87 pages)
Table of Contents
Advertisement
Max 410/420/430 User's Guide – Chapter 5
Client
Voice Configuration Table
The Voice Configuration table allows you to set the Jitter
Buffer Bounds, which are used to control Quality of
Service (QoS). The default values in the Voice Lower
Bound (3) and the Voice Upper Bound (5) fields should
not normally be changed.
Figure 14 – Voice Configuration Table
IP Configuration Table
In the IP Configuration table, you can enter the Max
410/420/430's IP-related parameters, such as Netmask
address, default gateway address, and DNS IP addresses.
Figure 15 – IP Configuration Table
If you are using a static IP address, you need to enter the
IP information in this table:
TCP Start Port
OPAL Start Port
UDP Start Port
NIC
36
Advertisement
Table of Contents
