Peripheral Configuration Submenu - NEC EXPRESS5800/100 SERIES N8100-1635F User Manual

Peripheral Configuration Submenu

IMPORTANT:
requests or the base I/O addresses. If an assigned value is already used
by another resource, it appears in yellow. Any yellow value must be re-
assigned.
Option
Serial Port B
Base I/O Address
Interrupt
USB 2.0 Controller
Serial ATA
SATA AHCI
Make sure to avoid any conflict in the interrupt
Parameter Description
Disabled Specify whether serial port B is
enabled or disabled.
[Enabled]
[3F8h] Specify the base I/O address for
serial port B.
2F8h
3E8h
2E8h
IRQ 3 Specify the interrupt request
(IRQ) for serial port B.
[IRQ 4]
Specify whether the USB 2.0
Disabled
controller is enabled or disabled.
[Enabled]
Disabled Specify whether the onboard
SATA controller is enabled or
[Enabled]
disabled.
[Disabled] The AHCI (Advanced Host
Controller Interface) is always
disabled on this system. This
option is view only.
This menu appears only when
[Serial ATA] is enabled.
Configuring Your Modular Server 4-13
Your Setting
[ ]: Factory-set