Transfer To Third Party - NEC EXPRESS5800/100 SERIES N8100-1635F User Manual

TRANSFER TO THIRD PARTY

The following must be observed when you transfer (or sell) the modular server or software provided
with the modular server to a third party:
Modular Server
Make sure to provide this manual and accessories along with the modular server to a third party.
IMPORTANT:
Be sure to take appropriate measures not to leak important data (e.g.,
customers' information or companies' management information) on the
removed hard disk drive to any third parties.
Data seems to be erased when you empty "Recycle Bin" of Windows or
execute the "format" command of the operating system. However, the
actual data remains written on the hard disk drive. Data not erased
completely may be restored by special software and used for
unexpected purposes.
It is strongly recommended that the software or service (both available
at stores) for data erasure should be used in order to avoid the trouble
explained above. For details on data erasure, ask your sales
representative.
Provided Software
To transfer or sell any software application that comes with the modular server to a third party, the
following requirements must be satisfied:
All provided software applications must be transferred and no backup copies must be
retained.
Transfer requirements listed in "Software License Agreement" that comes with each
software application must be satisfied.
Software applications that are not approved for transfer must be uninstalled before
transferring the modular server.
About data on the hard disk drive
Notes on Using Your Modular Server 1-7