4-10 Configuring Your Modular Server
Advanced
Option
Memory Configuration
PCI Configuration
Peripheral Configuration
Advanced Chipset Screen
Boot-time Diagnostic
Screen
Reset Configuration Data
NumLock
Parameter
Description
N/A
N/A
N/A
N/A
[Disabled]
Specify whether the self-diagnosis
(POST) running screen is displayed
Enabled
or not on booting.
If this item is set to "Disabled", the
"NEC" logo appears during POST.
(Pressing Esc causes the screen to
be switched to the POST running
screen.
If [Serial Port B] is specified for
[Server] - [Console Redirection] -
[BIOS Redirection Port], the POST
running screen is automatically
displayed.
[No]
Set "Yes" to clear the configuration
data (system information stored by
Yes
POST). The parameter is changed
to "No" after the system is booted.
On
Specify whether the Numlock feature
is enabled or disabled on booting.
[Off]
Your Setting
[
]: Factory-set