NEC EXPRESS5800/100 SERIES N8100-1635F User Manual page 115

On-screen
message
BB 1.8v Alm 00
BB 1.8v Alm 07
BB 0.9v Alm 00
BB 0.9v Alm 07
BB 1.5v Alm 00
BB 1.5v Alm 07
BB 3.3v Alm 00
BB 3.3v Alm 07
BB 5.0v Alm 00
BB 5.0v Alm 07
BB 12v Alm 00
BB 12v Alm 07
BB 1.2vsb Alm 00
BB 1.2vsb Alm 07
BB 3.3vsb Alm 00
BB 3.3vsb Alm 07
Description
1.8V voltage warning
(lower limit) was detected.
1.8V voltage warning
(upper limit) was
detected.
0.9V voltage warning
(lower limit) was detected.
0.9V voltage warning
(upper limit) was
detected.
1.5V voltage warning
(lower limit) was detected.
1.5V voltage warning
(upper limit) was
detected.
3.3V voltage warning
(lower limit) was detected.
3.3V voltage warning
(upper limit) was
detected.
5.0V voltage warning
(lower limit) was detected.
5.0V voltage warning
(upper limit) was
detected.
12V voltage warning
(lower limit) was detected.
12V voltage warning
(upper limit) was
detected.
1.2Vsb voltage warning
(lower limit) was detected.
1.2Vsb voltage warning
(upper limit) was
detected.
3.3Vsb voltage warning
(lower limit) was detected.
3.3Vsb voltage warning
(upper limit) was
detected.
Action
1. Take one of the following measures to power
off the modular server and then on.
* Power off the modular server from OS,
then press the POWER/SLEEP switch to
power on.
* Press the POWER/SLEEP switch to power
off the modular server, then press it again
to power on.
* Issue a command from Web browser of
EXPRESSSCOPE Engine or NEC
ESMPRO Manager.
2. Power off the modular server by issuing an
OS command or press the POWER/SLEEP
switch. Take the modular server out of the
Module Enclosure, and install it again. Then,
press the POWER/SLEEP switch to turn on
the modular server.
3. If the same error persists, contact your
service representative.
Troubleshooting 7-25