Making Backup Copies Of System Information - NEC EXPRESS5800/100 SERIES N8100-1635F User Manual

MAKING BACKUP COPIES OF SYSTEM INFORMATION

Save the information after completing the system setup. The system information includes the
current BIOS settings and any specific information for the server.
Without the backup data, you will not be able to recover the information.
You can save the information by the following process.
1.
Use SUV cable to connect a Flash FDD or USB FDD to the Modular Server.
The SUV cable is provided with N8181-49F Module Enclosure (1way).
See "Making Connection" described later for how to connect the SUV cable.
2.
Insert the NEC EXPRESSBUILDER DVD-ROM into the optical disk drive and reboot
the system.
The system will start from NEC EXPRESSBUILDER, and the [Boot selection] menu will
appear.
3.
Select [Tool menu (Normal mode)].
4.
Select [English].
5.
Select [Maintenance Utility].
6.
Select [System Information Management].
7.
Select [Save].
IMPORTANT: This guide contains procedures to use a floppy disk,
however, your modular server is not equipped with factory-installed
floppy disk drive. Use the optional Flash FDD or USB FDD.
Setting Up Your Modular Server 3-3