NEC EXPRESS5800/100 SERIES N8100-1635F User Manual page 146

8-12 Upgrading Your Modular Server
Removal
Install the hard disk drive in the following procedure.
1.
After providing the shutdown processing for the modular server to be removed, turn off
the power of the modular server.
2.
Pull out the modular server from the Module Enclosure.
See Chapter 3 for details.
3.
Place the modular server on anti-static sheet with little dust.
4.
Remove the internal SAS/SATA cable K410-223(00).
IMPORTANT: Keep the removed cable for future use.
5.
Remove the four screws from the hard disk drive bracket on modular server.
6.
Remove the four screws from the hard disk drive.