NEC EXPRESS5800/100 SERIES N8100-1635F User Manual page 73

BMC LAN Configuration Submenu
Option Parameter
Shared BMC [Disabled]
LAN
Enabled
LAN [Auto Negotiation]
Connection
100Mbps Full Duplex
Type
100Mbps Half Duplex
10Mbps Full Duplex
10Mbps Half Duplex
IP Address Variable
Subnet Mask Variable
Default Variable
Gateway
DHCP [Disabled]
Enabled
Web Interface
HTTP Disabled
[Enabled]
HTTP Port
Variable
Number
HTTPS Disabled
[Enabled]
HTTPS Port Variable
Number
Command Line Interface
Telnet Disabled
[Enabled]
Telnet Port Variable
Number
SSH Disabled
[Enabled]
SSH Port Variable
Number
Clear BMC [Enter] *
Configuration
Configuring Your Modular Server 4-21
Description
Set to [Disabled] to use the
management LAN port for
management LAN.
When set to [Enabled], the LAN port 1
can be used for management LAN
while sharing with the standard LAN.
When set to [Enabled], the
management LAN port is disabled.
Specify the connection type for
management LAN port.
Specify an IP address for
management LAN.
Specify a subnet mask for
management LAN.
Specify a default gateway for
management LAN.
Set to [Enabled] to obtain an IP
address from DHCP server
automatically. If you intend to specify
an IP address manually, set to
[Disabled].
Set to [Enabled] to use HTTP
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTP
communication.
Set to [Enabled] to use HTTPS
communication for Web interface.
Specify the TCP port number which
the management LAN uses for HTTPS
communication.
Set to [Enabled] to use Telnet
communication as a command line
interface.
Specify the TCP port number to be
used for Telnet communication.
Set to [Enabled] to use SSH
communication as a command line
interface.
Specify the TCP port number to be
used for SSH communication.
Press Enter and select "Yes" to
initialize the BMC configuration.
Your Setting
[ ]: Factory-set