Standard Features - NEC EXPRESS5800/100 SERIES N8100-1635F User Manual

2-2 General Description

STANDARD FEATURES

High performance
High-performance and low-power Intel®
Atom Processor N450
High-speed 1000BASE-T interface x 2
(1Gbps supported)
High-speed disk access (Serial ATA2)
Management Utilities
NEC ESMPRO
Remote monitoring feature
(EXPRESSSCOPE engine)
Self-diagnosis
Power On Self-Test (POST)
Test and Diagnosis (T&D)
Maintenance Features
Off-line Maintenance Utility
Server optimized for data center
With high-density design, up to 20
modular servers in 3U enclosure, or 160
to 240 modular servers in 42U rack can
be installed.
Operation at 40ºC in environmental
temperature is supported.
With low-power Atom processor, up to
240 modular servers can be installed in
generic data center environment.
The optimum power distribution and the
redundant power supply are supported by
EcoPowerGateway (centralized power
management module) conforming to 80
PLUS Gold.
Power optimization in proportion to load
Maintenance/replacement of modular
servers can be performed individually
with exclusive hosting feature
Factory-installed EXPRESSSCOPE®
Engine 2 allows simplified operation and
resource management.
Simplified resource management with
sliding tag
Easy installation with simplified rails
High-reliability
Temperature detection
■
Error notification
■
Internal voltage monitoring feature
■
Internal fan monitoring feature
■
BIOS password feature
■
Many Available Features
Software power-off
Remote power-on feature
AC-Link feature
Easy and Fine Setup
SETUP (BIOS setup utility)