NEC EXPRESS5800/100 SERIES N8100-1635F User Manual page 67

Express5800/100 series
Table of Contents

Advertisement

Security
Select "Set Supervisor Password" or "Set User Password" and press Enter to display the pop-up
screen. Note that User password setup is not available before Supervisor password setup.
Set a password on the pop-up screen. Enter a password of up to seven alphanumeric characters and
symbols from the keyboard.
IMPORTANT:
User password setup is not available before Supervisor password
setup.
Do not set any password before installing the OS.
If you have forgotten your password, ask your service
representative.
Option
Parameter
User Password
[Clear]
Is
Set
Supervisor
[Clear]
Password Is
Set
Set User
Up to 7
Password
alphanumeric
characters
Set Supervisor
Up to 7
Password
alphanumeric
characters
Password on
[Disabled]
boot
Enabled
Power Switch
[Disabled]
Inhibit
Enabled
Disable USB
[Disabled]
Ports
Front
Internal
Front Internal
Description
Indicates the user password setting status
(view only).
Indicates the supervisor password setting
status (view only).
Press Enter to display the user password
entry screen. With a user password,
*1
accessible SETUP menus are restricted.
This option is available only when you log into
the SETUP utility with the password
"Supervisor".
Press Enter to display the supervisor
password entry screen. With the supervisor
*1
password, all SETUP menus are available for
access.
This option is available only when you log into
the SETUP utility with the password
"Supervisor".
Specify whether to request a user password
entry at boot-up. User password must be set
beforehand.
If the supervisor password is set and this
option is disabled, BIOS determines that a
user is booting.
Specify whether the POWER/SLEEP switch
of the modular server is enabled or disabled.
If Enabled, the POWER/SLEEP switch
cannot be used to power off the modular
server. (The forced shutdown, by pressing the
POWER/SLEEP switch for 4 seconds or
longer, is available.)
Specify whether the USB ports are enabled or
disabled.
Configuring Your Modular Server 4-15
Your Setting
[
]: Factory-set

Advertisement

Table of Contents
loading

This manual is also suitable for:

Express5800/e110b-m

Table of Contents