Status Lamp - NEC EXPRESS5800/100 SERIES N8100-1635F User Manual

STATUS Lamp

The STATUS lamp stays lit in green when the modular server is in successful operation. When the
STATUS lamp is lit or blinking in amber, it indicates that the system has failed.
In addition, you can view the detailed information on error message on virtual LCD when the
STATUS lamp is lit or blinking in amber. You can use the virtual LCD through the Web browser of
EXPRESSSCOPE engine (BMC) or NEC ESMPRO Manager.
See Chapter 7 for indications of the STATUS lamp and virtual LCD, descriptions, and actions to
take.
NOTE:
can view the System Event Log (SEL) to identify the cause of a trouble.
UID (Unit ID) Lamp
Pressing the ID switch brings the lamp to light, and pressing again brings the lamp to go off. The ID
lamp is intended to identify a specific modular server in the system in which more than one modular
server is installed. Making this lamp being lit can help the maintenance work to identify the faulty
device.
If you press the ID switch, the lamp goes on. When the recognize command is received from
management software such as NEC ESMPRO Manager, the lamp blinks.
If the modular server has the NEC ESMPRO installed, you
General Description 2-7