Adaptec Scsi Utility; Running The Scsi Utility - NEC EXPRESS5800/120Le User Manual

Adaptec SCSI Utility

The Adaptec SCSI Utility detects the SCSI host adapters on the server board.
Use the Adaptec SCSI Utility to:
!
Change default values
!
Check and/or change SCSI device settings that may conflict with those of
other devices in the server

Running the SCSI Utility

You access the Adaptec SCSI Utility when you turn on or reboot your system.
To run the Adaptec SCSI utility, perform the following procedure:
1. Power-on or reboot the system.
2. When this message appears on the video monitor:
Press Ctrl-A to run SCSI Utility...
3. Press Ctrl+A to run this utility. When it appears, choose the host adapter
that you want to configure.
4. The SCSI utility starts. When the Adaptec SCSI Utility detects more than
one AIC-78xx host adapter, it displays a selection menu listing the bus and
device number of each adapter. When the selection menu appears, select the
channel you wish to configure as follows:
Bus : Device : Channel
01 : 04 : A*
01 : 04 : B
*Internal SCSI connector.
5. Once you select the adapter, the following screen is displayed:
Menu
Configure/View Host
Adapter Settings
SCSI Disk Utilities
6. If you wish to format a disk, verify disk media, or display a list of devices
and their SCSI IDs, select "SCSI Disk Utilities". If you wish to configure
the adapter or a device, select "Configure/View Host Adapter Settings".
Selected SCSI Adapter
AIC7899
AIC7899
Description
Configure host adapter and device settings.
The utility scans the SCSI bus for SCSI devices, reports a
description of each device. Run these utilities before
configuring SCSI devices.
Configuring Your System 3-15